Mold control
Material for treating mold infestation on wood, e.g. in pipe organs or on building structures.
Incorrect ventilation, energy-saving heating measures, excessive humidity in rooms, damp wood or walls or even damp layers of dust are ideal conditions for mold to thrive.
In addition to changing factors favorable to mold, the sustainable removal of mold spores is also a priority due to health risks. For this purpose, we offer substances developed by UmAnLab Schmelz that enable clean removal and reduce new infestation. However, if the room climate is not changed, the mold will only stay away until there is a breeding ground for new mold spores.
Fungo-Clean A concentrate for damp cleaning of infested, smooth surfaces made of wood or mineral substances. Use after dry cleaning of the surface with a brush and vacuum cleaner. Please only use vacuum cleaners with appropriate filters and dust masks. Dilute the concentrate with water at a ratio of 1:25 to 1:100, depending on the degree of soiling.
Fungo-Clean reliably removes airborne mold mycelia from the surface and prepares it for fungicidal treatment, e.g. with Fungo-EX-Forte. Available as a concentrate in 1 liter containers. As this is a concentrate, we supply a maximum of 2 x 1-liter bottles to customers who also use Fungo-Ex-Forte. For professional application, a maximum of 1 liter of Fungo-Clean is required when using 5 liters of Fungo-Ex.
Fungo-EX-Forte Highly effective fungicidal building protection agent for the eradication of high-grade mold infestation on smooth wood and mineral building materials with a pronounced remanence effect that reliably prevents re-infestation. However, it should be noted that new layers of dust can again be an optimal breeding ground for mold spores from the air if the air humidity is high enough.
Available in 1 and 5 liter containers. Is applied with a brush. 1 liter is sufficient for 4 - 8 m², depending on absorbency.
The products are supplied with detailed application and protection instructions. You can view and print out a technical data sheet and the instructions for use as a pdf file below.
The product approval number for Fungo Ex - Forte is BAUA No. N-46646.
For prolonged use, it is advisable to use class P3 respiratory protection in addition to good ventilation. If Fungo-Ex is applied by spraying, filter class A2P3 must be used. The use of these products is the responsibility of the user.
Please note that we can only offer these liquid products in Germany.
Please also refer to our other products such as air filters for engine boxes and humidity measuring devices.
If leather is treated with FungoEx in organ building, we recommend a follow-up treatment to regrease the leather. The Ballistol spray, the leather and mechanics oil or the high-quality pasty leather grease are useful for this purpose.
Further background information on mold growth, its effects and suitable remedies and on spore contamination in the organ workplace can be found in our technical information section.
Instructions for use and technical data sheets
FungoClean instructions for use.pdf
FungoClean safety data sheet.pdf
Funge-Ex-Forte data sheet.pdf
Fungo-EX-forte instructions for use.pdf
Fungo-EX-forte safety data sheet.pdf